What Inert Waste Can Be Treated in a Soil Treatment Plant?

Markus Reichenbach ·

In a soil treatment facility, mineral waste such as contaminated soils, construction rubble, dredged material, and certain process residues can generally be treated. The decisive factors are the type of contamination and the physical composition of the material. Not every waste is legally considered inert, and not every type of contamination is suited to the same treatment process. The following questions clarify which waste materials are specifically eligible, which pollutants can be removed, and what happens to the treated material afterward.

What is legally considered inert waste in soil remediation?

According to the European Waste Framework Directive and the German Circular Economy Act, inert waste refers to mineral waste that does not undergo significant physical, chemical, or biological change. It does not dissolve, burn, or react with other substances. Typical examples include uncontaminated soil, concrete, bricks, and glass free of pollutants.

In soil remediation, however, the term must be used with caution. Soils contaminated with organic pollutants or heavy metals lose their inert status. Legally, they are classified as hazardous or non-hazardous waste, depending on the type and concentration of pollutants. Classification is based on the Waste Catalogue Ordinance (AVV) and the assignment values set out in the LAGA guidelines. This classification is decisive for acceptance at a soil treatment facility, as it determines which disposal routes are permissible and which permits are required.

What types of mineral waste are accepted at a soil treatment facility?

Soil treatment facilities generally accept contaminated soils, construction rubble, dredged material, and mineral process residues such as slags, ashes, sludges, and dusts. A prerequisite is that the material has a mineral base structure that allows for thermal or mechanical-physical treatment.

In detail, the acceptance spectrum typically includes the following materials:

  • Contaminated soils from brownfield remediation and construction projects
  • Construction rubble with organic or inorganic contamination
  • Dredged material from waterways and harbor basins
  • Slags and ashes from industrial processes
  • Sludges and dusts from exhaust gas treatment or production
  • Process residues from chemical or metalworking facilities

It is important that the material is analytically characterized prior to acceptance. This is the only way to ensure that it meets the regulatory requirements of the facility and that the correct treatment process is selected. Material flow management plays a central role in safely and compliantly directing waste streams.

Which pollutants can be removed from soils by thermal desorption?

Thermal desorption removes volatile and semi-volatile organic pollutants from mineral waste. These include mineral oil hydrocarbons (TPH), BTEX, polycyclic aromatic hydrocarbons (PAH), phenols, polychlorinated biphenyls (PCB), PFAS/PFOS, dioxins and furans (PCDD/PCDF), cyanides, nitroaromatics, and numerous chlorinated hydrocarbon compounds. Mercury (Hg) can also be driven out of the soil through thermal treatment.

During thermal treatment in a rotary kiln, the material is heated at temperatures of up to approximately 600 °C, depending on the material and pollutant load, under oxygen exclusion. The pollutants are either destroyed or converted to a gaseous state and subsequently treated safely in a multi-stage exhaust gas cleaning system. This includes dedusting, thermal post-combustion, flue gas scrubbing, and activated carbon filters to ensure compliance with statutory emission limit values.

Inorganic pollutants such as heavy metals (except mercury) are not removed from the soil by thermal desorption but remain in the solid material. For these cases, other processes or a combination of treatment steps are required.

Which waste materials are not suitable for a thermal soil treatment facility?

Waste materials not suitable for thermal desorption include those with high water content without prior drying, materials with a very high proportion of non-mineral components, and waste whose pollutants are exclusively inorganic in nature. Explosive or radioactive materials are also fundamentally excluded.

Specifically unsuitable materials include, among others:

  • Untreated sludges with very high water content without mechanical pre-treatment
  • Soils with exclusively inorganic heavy metal contamination (except Hg)
  • Waste with a high organic content that requires a different disposal route
  • Radioactive or explosive materials
  • Waste that falls outside the approved pollutant spectrum of the respective facility

The suitability of a material is always assessed on a case-by-case basis. Careful analytical pre-investigation is therefore essential before a waste material can be accepted for thermal treatment.

How is contaminated soil classified prior to treatment?

The classification of contaminated soil is carried out through sampling and laboratory analysis. This determines the type and concentration of pollutants, classifies the soil according to the Waste Catalogue Ordinance (AVV), and establishes whether it qualifies as hazardous or non-hazardous waste. This classification is a prerequisite for legally compliant disposal.

The classification process typically involves the following steps:

  1. On-site soil sampling in accordance with recognized standards (e.g., DIN specifications)
  2. Laboratory analysis of relevant pollutant parameters
  3. Classification according to AVV and LAGA assignment values
  4. Preparation of a disposal certificate or consignment note
  5. Coordination of the appropriate disposal route with the facility

Prior to mechanical pre-treatment at the facility, the delivered material is additionally subjected to incoming analysis. Particle size distribution, water content, and pollutant concentrations are examined to determine the optimal process parameters for the rotary kiln. Mechanical-physical pre-treatment specifically prepares the material for thermal desorption.

What happens to the soil after thermal treatment?

After thermal desorption, the result is a largely pollutant-free mineral material that can be used as a recycled construction material or deposited at a landfill. Recoverability depends on the residual pollutant levels and the assignment values of the respective landfill class or recovery class.

The treated material is analytically re-examined after treatment. If pollutant levels fall below the applicable limit values, the soil can, depending on its quality:

  • Be used as a recycled construction material in road or earthworks construction
  • Be used as backfill material for excavations and pits
  • Be deposited at a landfill of the appropriate class

In many cases, thermal treatment transforms hazardous waste into a recoverable mineral material. This conserves resources and reduces the demand for primary raw materials. Information on the environmental footprint and the responsible handling of treated soils can be found under Sustainability and Soil.

How ARE Deutzen helps with the treatment of mineral waste and contaminated soils

ARE Deutzen GmbH specializes in the treatment of complex contaminated mineral waste and has operated one of the most powerful thermal soil treatment facilities in Germany since 1994. The company offers concrete solutions for civil engineering firms, industrial clients, and remediation contractors looking to safely and compliantly revitalize contaminated sites.

Services at a glance:

  • Acceptance and treatment of contaminated soils, construction rubble, dredged material, and mineral process residues
  • Thermal desorption in a rotary kiln at temperatures of up to approximately 600 °C, depending on the material and pollutant load, under oxygen exclusion
  • Treatment of a broad pollutant spectrum: TPH, BTEX, PAH, PCB, PFAS/PFOS, Hg, dioxins, and many more
  • Multi-stage exhaust gas cleaning to ensure safe compliance with all emission limit values
  • Mechanical-physical pre-treatment and interim storage
  • Complete material flow management including disposal certificates and accompanying documentation
  • Certified waste management company under the KrWG, certified to ISO 9001, 14001, 50001, and 18001

With over 30 years of experience and more than 2.5 million treated tons of mineral materials, ARE Deutzen has the technical expertise and regulatory foundation to safely implement even demanding remediation projects. Get in touch and have your waste individually assessed.