What Role Does Residence Time Play in the Rotary Kiln?

Markus Reichenbach ·

The residence time in a rotary kiln refers to the period that contaminated material spends inside the heated kiln tube while being thermally treated. It is a central control parameter: only when temperature and residence time are coordinated with each other are pollutants completely desorbed or destroyed. The following sections shed light on the most important relationships surrounding this parameter.

How does residence time affect pollutant destruction in a rotary kiln?

Residence time directly determines how long the contaminated material is exposed to the treatment temperature. The longer the material remains in the kiln, the more time volatile pollutants have to transfer into the gas phase or thermally decompose. Short residence times lead to incomplete desorption, while sufficiently long residence times enable safe pollutant destruction.

Temperature and residence time always work together. A rotary kiln operated at up to approximately 600 °C under oxygen exclusion can, with sufficient residence time, reliably remove even poorly volatile compounds such as polychlorinated biphenyls (PCB) or polycyclic aromatic hydrocarbons (PAH) from the solid material. The exclusion of oxygen prevents uncontrolled combustion and ensures that pollutants are transferred in a controlled manner into the gas stream, where they are subsequently completely oxidized in the thermal afterburner.

For thermal soil treatment, this means: residence time is not a fixed value but must be individually adjusted for each material in order to achieve legally compliant treatment results.

What factors determine the optimal residence time?

The optimal residence time in a rotary kiln depends on the type and concentration of pollutants, the grain size and moisture content of the material, and the set treatment temperature. In addition, plant-specific parameters such as the inclination angle and rotational speed of the kiln tube play a role.

In detail, the following factors are relevant:

  • Pollutant type and volatility: Easily volatile substances such as mineral oil hydrocarbons (TPH) or BTEX require less time than poorly volatile compounds such as PCDD/PCDF or PFAS.
  • Pollutant concentration: More heavily contaminated materials generally require longer residence times so that all pollutants can completely exit the solid material.
  • Grain size and homogeneity: Fine-grained materials have a larger surface area, which accelerates desorption. Coarse-grained or inhomogeneous materials, on the other hand, require more time.
  • Moisture content: Moist material must first be dried before actual desorption begins. High moisture therefore extends the effectively required residence time.
  • Kiln inclination and rotational speed: These mechanical parameters allow the throughput speed of the material, and therefore the residence time, to be directly regulated.

The mechanical pre-treatment of the material also plays an important role: screening and size reduction improve homogeneity, which promotes uniform heat transfer and thus reliable pollutant destruction in the rotary kiln. More details are provided in the mechanical-physical treatment section.

What happens if the residence time is too short or too long?

A residence time that is too short leads to incomplete desorption: pollutants remain in the treated solid material, and the statutory limit values for the treatment product are not met. A residence time that is too long, on the other hand, is economically inefficient and can in certain cases unnecessarily stress the material structure.

If the desorption time is too short, there is a risk that particularly poorly volatile compounds will not completely exit the solid grain. The treated material then does not meet the requirements for proper pollutant destruction and cannot be used as cleaned construction material or landfill material. In the worst case, the material must be treated again, which causes considerable additional costs.

An excessively long residence time, however, reduces the throughput of the plant without any notable additional cleaning effect. For certain mineral materials, overly intensive thermal treatment can also alter the physical properties of the solid material. The art lies in choosing the residence time such that pollutant destruction is carried out safely and completely without unnecessarily tying up capacity.

How does residence time differ depending on the pollutant class?

The required residence time in a rotary kiln varies considerably depending on the pollutant class. Easily volatile organic compounds such as BTEX or TPH leave the solid material at lower temperatures and shorter residence times. Poorly volatile or strongly bound pollutants such as PCB, PCDD/PCDF, or PFAS require higher temperatures and longer desorption times.

Easily volatile compounds

Benzene, toluene, ethylbenzene, and xylenes (BTEX) as well as mineral oil hydrocarbons transfer into the gas phase at temperatures between 250 and 400 °C. The residence time for these substances can be kept shorter, provided the temperature is sufficiently high. This makes the treatment of this pollutant class comparatively efficient.

Poorly volatile and persistent compounds

Compounds such as PCB, PAH, PCDD/PCDF, and PFAS are considerably more stable and require both higher temperatures and longer residence times in order to be completely desorbed. Mercury (Hg) represents a special case: although it is volatile, it requires precise temperature control, as it evaporates at lower temperatures and must be safely separated in the exhaust gas system. For cyanides and nitroaromatics, complete thermal decomposition is the goal, which also requires adapted residence times.

How is residence time controlled and monitored during ongoing operation?

The residence time in a rotary kiln is controlled during ongoing operation primarily via the rotational speed of the kiln tube and its inclination angle. In addition, the material feed rate, temperature profile along the kiln, and exhaust gas parameters are continuously monitored in order to adjust process control in real time.

In concrete terms, this means: a higher rotational speed transports the material through the kiln more quickly and shortens the residence time. A lower rotational speed extends it accordingly. The inclination angle of the tube influences how quickly the material moves forward under gravity. Both parameters can be varied during operation without having to interrupt the process.

Continuous temperature measurements at multiple points along the kiln tube as well as analysis of the exhaust gas composition serve as monitoring tools. If the pollutant concentration in the exhaust gas changes in a characteristic way, conclusions can be drawn about the progress of desorption. In addition, samples of the treated material are regularly analyzed to confirm compliance with the limit values for the treatment product. A comprehensive quality management system ensures that all process parameters are documented and traceable.

The combination of mechanical control and analytical monitoring allows for precise process management tailored to the respective material. Particularly in the case of complex contamination mixtures, such as those frequently encountered at decommissioned industrial sites or former gasworks, this flexibility is crucial for a reliable treatment result.

How ARE Deutzen GmbH ensures the optimal residence time for your project

ARE Deutzen GmbH has been operating a thermal soil treatment plant in western Saxony since 1994 and has more than 30 years of experience in setting and optimizing process parameters for contaminated mineral waste. The residence time is determined individually for each order on the basis of a material characterization.

The range of services includes:

  • Acceptance and characterization of contaminated soils, construction rubble, and mineral waste
  • Mechanical pre-treatment to optimize grain size and homogeneity
  • Thermal desorption at up to approximately 600 °C under oxygen exclusion with adapted residence time depending on the pollutant class and material
  • Multi-stage exhaust gas purification with thermal afterburner, flue gas scrubbing, and activated carbon filter
  • Analytical monitoring and documented quality control of the treatment product
  • Complete material flow management for all resulting material fractions

If you are planning a remediation project or would like to safely dispose of contaminated material, contact ARE Deutzen directly. The on-site specialists will assess your material and develop a tailored solution. Get in touch now and receive an expert initial assessment.