How Is It Determined Whether the Defined Remediation Goal Has Been Achieved?

Markus Reichenbach ·

Whether the remediation target has been achieved is demonstrated through an officially supervised verification process: defined limit values for contaminants in the soil or groundwater are tested by accredited laboratories, and the results are documented in a final report. The basis for this is the target values established in the remediation plan, which are determined by type of use, protected assets, and applicable law. The following sections answer the most important questions about the soil remediation verification in detail.

Which authorities and bodies must confirm the remediation success?

In Germany, the remediation success must generally be confirmed by the competent soil protection authority. This is typically the district office or the environmental authority of the respective federal state. In addition, accredited experts pursuant to § 18 BBodSchG are frequently involved, providing professional support for sampling and assessment.

The typical process looks like this: the party responsible for remediation commissions an approved expert who plans and carries out the final investigation. This expert then submits a remediation completion report to the authority. The authority reviews the report, evaluates the results, and issues an official confirmation upon success. In some federal states, a formal certificate is provided for this purpose; in others, confirmation is given by letter or administrative decision.

For larger projects, such as those at former industrial sites or military installations, additional bodies may be involved: water authorities when groundwater is affected, mining authorities for legacy mining contamination, or the emissions control authority when emissions are a factor.

How is sampling of the remediated soil carried out?

Sampling of the remediated soil is carried out according to an officially coordinated sampling plan. Soil samples are taken from defined grid points or depth horizons and analyzed for the relevant contaminants by an accredited laboratory. The sampling itself must be conducted in accordance with recognized technical standards, in particular DIN ISO 10381.

It is essential that sampling is representative. This means: the number, distribution, and depth of sampling points must be chosen so that they reliably reflect the actual contaminant situation in the remediated area. In the case of thermal desorption, the treated material is sampled after the process to demonstrate that contaminants have been reduced to the required level.

Laboratory analyses must be carried out by an institute accredited in accordance with DIN EN ISO/IEC 17025. Only then are the results officially recognized. In addition to soil analysis, groundwater monitoring via monitoring wells may also be required depending on the site, to ensure that no leaching of contaminants is occurring.

Which limit values determine whether the remediation target has been met?

The applicable limit values depend on the defined remediation target established in the remediation plan. The decisive references are the assessment and action values of the Federal Soil Protection and Contaminated Sites Ordinance (BBodSchV), as well as site-specific agreed target values that are based on the planned subsequent use.

The BBodSchV differentiates by type of use: stricter values apply to children’s play areas than to commercial or industrial areas. For contaminated soils containing pollutants such as PAHs, TPH, heavy metals, or chlorinated hydrocarbon compounds, the measured concentrations after treatment are compared against these reference values.

Important: the remediation target does not necessarily require complete freedom from contaminants. It may also be a use-related target value that enables safe use of the site without requiring complete decontamination. These target values are officially established before remediation begins and are binding for the verification process.

What happens if the remediation success cannot be demonstrated?

If the sampling results show that the remediation target has not been achieved, further measures are required. The authority may order additional remediation, demand supplementary treatment steps, or require the remediation plan to be revised. The responsibility lies with the party obligated to remediate.

In practice, various scenarios may arise:

  • Localized exceedances: Individual sampling points exceed the target value while the majority of the area meets the requirements. In this case, targeted post-treatment may be sufficient.
  • Systematic shortfall: The treatment process has not reduced the contaminants sufficiently. In this case, the treatment process must be reviewed and adjusted.
  • New contamination hotspots: Previously unknown contamination areas are discovered during the final investigation. This requires an expansion of the remediation scope.

Early quality assurance during remediation — for example through interim sampling and close coordination with the expert — reduces the risk that the remediation success cannot ultimately be demonstrated. Quality management in the treatment process plays a central role in this regard.

How is the remediation completion documented and archived?

The remediation completion is documented in a final report that summarizes all relevant information about the remediation project: the initial situation, measures carried out, sampling results, laboratory findings, and the assessment by the expert. This report is submitted to the competent authority and archived upon confirmation.

The content of a complete remediation completion report typically includes:

  1. Description of the initial situation and remediation target
  2. Documentation of the remediation measures carried out and quantities treated
  3. Sampling plan and sampling points
  4. Laboratory analytical results with comparison to target values
  5. Assessment by the approved expert
  6. Official confirmation of remediation success

Archiving is not merely a formal obligation. The remediation completion is recorded in the land register or in the contaminated sites register of the respective federal state. This is relevant for the future use of the property, for example in the event of a sale or building permit procedures. Documents should be retained permanently, as they may be decisive in the event of future changes in use or official inquiries. A complete material flow management system with seamless documentation of the quantities of materials disposed of is an essential component of the overall proof.

How ARE Deutzen GmbH supports the verification of the remediation target

ARE Deutzen GmbH has specialized in the treatment of contaminated mineral waste for over 30 years and supports civil engineering companies as well as industrial customers in having the remediation success verified and demonstrated. The company specifically provides the following services:

  • Thermal treatment of contaminated soils and mineral waste at temperatures of up to approximately 600 °C depending on the material and contaminant load, ensuring reliable destruction of contaminants
  • Treatment of a broad spectrum of contaminants: TPH, PAHs, BTEX, PCBs, PFAS/PFOS, Hg, cyanides, nitroaromatics, and further chlorinated hydrocarbon compounds
  • Seamless documentation of all quantities of materials treated as the basis for the remediation completion report
  • Compliance with all statutory emission limit values through multi-stage exhaust gas purification
  • Certified waste management company pursuant to § 52 KrWG with certifications to ISO 9001, 14001, 50001, and 18001

If you want to ensure that your remediation project fully meets the requirements for soil remediation verification, speak directly with the experts at ARE Deutzen. Get in touch now and receive a professional assessment of your project.