How Is Contaminated Excavated Soil Treated Thermally?

Markus Reichenbach ·

Contaminated excavated soil is thermally treated by heating it in a rotary kiln at temperatures of up to approximately 600 °C under the exclusion of oxygen. This process, known as thermal desorption, transfers volatile pollutants into the gas phase or destroys them directly. It is suitable for a wide range of organic and inorganic contaminants and is today one of the most effective methods for treating contaminated soils. The following sections answer the most important questions about the process.

Which pollutants make excavated soil subject to treatment?

Excavated soil is considered subject to treatment when it contains pollutants in concentrations that preclude recovery or disposal without prior treatment. The most common triggers include mineral oil hydrocarbons (MKW), polycyclic aromatic hydrocarbons (PAH), benzene, toluene, ethylbenzene and xylene (BTEX), phenols, and chlorinated hydrocarbon compounds.

In addition, soils containing heavy metals, particularly those with mercury (Hg), as well as soils containing polychlorinated biphenyls (PCB), per- and polyfluoroalkyl substances (PFAS/PFOS), dioxins and furans (PCDD/PCDF), cyanides, or nitroaromatics may also be subject to treatment. The legal basis is formed by the Circular Economy Act and soil protection regulations, which set limit values for pollutant concentrations in soil.

Typical sources of such contamination include decommissioned industrial sites, former gasworks, military properties, and chemical plants. Anyone who encounters contaminated excavated soil during construction work is obliged to properly declare it, transport it, and deliver it to a licensed treatment facility.

How does thermal desorption work for contaminated soil?

Thermal desorption is a process in which contaminated soil is heated in a rotary kiln to temperatures of up to approximately 600 °C without the introduction of oxygen. The heat either directly destroys organic pollutants or causes them to vaporize and leave the soil as a gas.

Mechanical pre-treatment

Before the soil enters the rotary kiln, it undergoes mechanical pre-treatment. During this step, coarse components such as stones or construction rubble are separated and the material is processed to a suitable particle size. This step significantly improves the efficiency of the thermal treatment.

Thermal treatment and exhaust gas purification

In the rotary kiln, the material rotates continuously, ensuring uniform heat transfer. The treatment temperature is adjusted according to the pollutant profile of the material. The resulting pollutant gases are then treated in a multi-stage exhaust gas purification system: dust removal, thermal post-combustion, flue gas scrubbing, and an activated carbon filter ensure that statutory emission limits are reliably maintained. The process operates under the exclusion of oxygen, which prevents the formation of dioxins and furans during treatment.

What happens to the soil after thermal treatment?

After thermal treatment, the soil is generally free of the organic pollutants originally present. Depending on the initial contamination and analysis results, the treated material can be recovered as a construction material or deposited at suitable landfill sites. Return to the natural cycle is possible under certain conditions.

The quality of the treated material is documented through sampling and laboratory analyses before and after treatment. Only when the pollutant concentrations fall below the applicable limit values is the material approved for recovery or disposal. This verification is an essential part of the proper disposal process and protects both the client and the environment.

Mineral residues remaining after treatment are further managed within a structured material flow management system. This involves assessing which recovery or disposal routes are suitable and permissible under regulatory requirements for the respective material.

Which types of waste may be treated in a thermal desorption facility?

In a licensed thermal desorption facility, in addition to contaminated soils, construction rubble, dredged material, and various process residues such as slags, ashes, sludges, and dusts can also be treated, provided they contain organic pollutants that can be destroyed or expelled by heat.

The specifically permissible waste types and pollutant groups are defined in the permit of the respective facility under the Federal Immission Control Act (BImSchG). Typical treatable contaminants include MKW, BTEX, PAH, phenols, PCB, PFAS/PFOS, PCDD/PCDF, cyanides, nitroaromatics, and chlorinated hydrocarbon compounds. Mercury (Hg) is also treatable, as it vaporizes at appropriate temperatures and can be separated in the exhaust gas purification system.

Not suitable for thermal desorption are wastes that contain exclusively inorganic heavy metals that do not become volatile through heat, as well as radioactively contaminated materials. An incoming analysis is therefore always carried out prior to acceptance of a waste to verify the material’s suitability for the process.

When is thermal desorption the right treatment method?

Thermal desorption is the right choice when the soil is contaminated with volatile or semi-volatile organic pollutants that can be destroyed or expelled by heat, and when other methods such as biological or chemical-physical treatments are not sufficiently effective due to the type or concentration of the pollutants.

The process is particularly suitable for highly contaminated soils, complex pollutant mixtures, and materials where rapid and complete pollutant removal is required. Compared to alternatives such as landfilling, it offers the advantage that the material may be recoverable after treatment, which can reduce disposal costs and conserve resources.

Thermal desorption is less suitable, however, for soils contaminated exclusively with inorganic pollutants such as heavy metals that show no volatility at the temperatures used. In such cases, other methods of mechanical-physical treatment or specific landfill solutions are considered. A thorough pollutant analysis is therefore the basis for every process decision.

Which permits and documentation are required for the disposal of excavated soil?

Several permits and documents are required for the disposal of contaminated excavated soil: the waste generator must correctly declare the waste, commission a licensed disposal company, and document proper disposal through accompanying documents or disposal certificates. Hazardous wastes are subject to the documentation obligation under the Waste Verification Ordinance (NachwV).

In concrete terms, this means: prior to disposal, a waste analysis must be carried out that documents the type and concentration of pollutants. On this basis, the waste is assigned a waste code number in accordance with the European Waste Catalogue (EWC). Hazardous wastes must be transported with an accompanying document and disposal must be documented by a disposal certificate.

The commissioned disposal facility must hold the corresponding immission control permit under the BImSchG and be certified as a specialist waste management company (EfB) under § 52 of the Circular Economy Act. This certification confirms that the facility meets the statutory requirements regarding technology, organization, and personnel. Quality management systems to ISO 9001 and environmental management systems to ISO 14001 are further indicators of a reliable disposal partner. Information on the relevant quality standards helps in selecting the appropriate service provider.

How ARE Deutzen GmbH helps with the thermal treatment of contaminated excavated soil

ARE Deutzen GmbH has specialized in the thermal treatment of contaminated mineral waste since 1994 and operates one of Germany’s most powerful thermal desorption facilities at its Deutzen site in western Saxony. Over more than 30 years, more than 2.5 million tonnes of contaminated soils and mineral materials have been treated.

For civil engineering companies, remediation planners, and industrial clients, ARE Deutzen specifically offers:

  • Thermal treatment of soils, construction rubble, and dredged material contaminated with MKW, PAH, BTEX, PCB, PFAS/PFOS, Hg, dioxins, and many other pollutants
  • Operation of a rotary kiln at temperatures of up to approximately 600 °C under the exclusion of oxygen with multi-stage exhaust gas purification
  • Complete material flow management including interim storage, mechanical-physical pre-treatment, and disposal logistics
  • Certification as a specialist waste management company (EfB) as well as to ISO 9001, 14001, 50001, and 18001
  • Permits under the Federal Immission Control Act for a broad range of waste types and pollutant groups
  • Individual consultation and project support from incoming analysis through to disposal certification

If you wish to dispose of contaminated excavated soil safely and in compliance with the law, speak directly with the experts at ARE Deutzen. Get in touch now and describe your project.